PNEUMATIC SELFSUCKING PUMPS

Type: AIR 50 - inox

 


Pneumatic selsucking pumps are intended for pumping of agressive, unpure, pure and viscose liquids in several branches of industry. Main advantage such kind of pump is pneumatic motor. 
Axial rotor lifts up the liquid at the start of sucking pipe and pushes it under pressure into a pressure pipeline.

the pump's construction enables pumping of liquids with oil viscosity and oil emulsions. We can change the pump's flow with regulation small handle or with regulation on the pressure regulator valve. Pump can be delivered with wall console for taking off the pump and board with user manual.

 

*extraordinarily light and reliable construction  * for pumping of problematical liquids *  hights of sucking pipes up to 1500mm *    operation possible at pressure 4.5 bar  *   ideal proportion for price-quality *  pneumatic motors of German manufacturer *

  • Material: INOX W.Nr.1.4571 Cr.Ni.Ti

  • Max flow: 50 l/min

  • Max pressure hight: 4 mVS

  • Motor: pneumatic, 350 W at 65 bar

  • Air consumption: 300 l/min

  • Cinematic viscosity: < 1142 mm/s

  • Tightenning: PTFE + filling

  • Max media temp.: 90o C

  • Weight: 2 kg

  • Length of sucking pipe: 620 mm for ADR packing,

       900 mm for 100 l barrels

 

 

 

 

 

 

 

  AIR-60 INOX 
   L=1200 mm,
   Q=60L/ min
Special series
The length of sucking pipe is more than 1 m 
and pipe's diameter 
50,40, 38 or 32 mm 
with inox rotor possibility mixing / pumping,  polypropylene pipe, inox holder, with  integrated nonreturning valve   ...             

       

   

 







   Črpalka se odlaga na stensko
 konzolo skupaj s  tlačnimi cevmi.

 

[ Back ]             [ Products ]     [ Location ]              [ News ]       [ Useful info. ]            [ E-Mail ]   


      LASTRATECH d.o.o. , Rakovica 28, 4201 Zg.Besnica-KRANJ   tel: +386 4 250 66 30     fax:  +386 4 250 66 33,    gsm:  +386 41 642 631