Type: R150-PP		Material: PP polypropylene - Trovidur Max flow: 200 l/min Max pressure hight: 8 mVS Motor: 0,55 W 3x 380V, 50 Hz Cinematic viscosity: < 114² mm/s Max media temp.: 85^o C Weight: 7 kg Length of sucking pipe: up to 5 m	pumping of chrom electrolite Q=400l/min HARTCHROM RENDULIČ
* it can operate in DRY RUN * that means it works without presence of media * has no bearings * We don't pump just the liquids with * dirt * but also * sharp, hard (abrasive small parts) * it is PLASTIC * It is allowed to pump most acids and leaches * high density substances are not a problem * INOX CONSTRUCTION for pumping * food products * HOT AGRESSIVE LIQUIDS are not problem * PRICE * really good * becides listed advantages * CONSTRUCTION * on request FLOWS up to 600 l/ min, it is 36 m3 water in one hour * DEVELOPMENT * higher flows * REFERENCES * eminence Slovene chemical food * machine * electro * rubber * paper * textile * enviromental * pharmacy industry ... * with one word EXCELLENT *
R-300 PP CHEMO D.D. Ljubljana			R-550 PVC TVT LENTHERM D.O.O.
R-150 PP R-200 PP R- 50 PP S exhaust L exhaust I exhaust Construction of pressure line for connection are made on request. Standard ones are made with screw clamp and connection smrekico with INOX objemko. For larger pumps is standard prirobnični junction. Pressure exhausts are I , S in L		R-200PVC and S-80PVC with floating level switch	R-400 PVC for pumping of agressive and abrasive media Q= 400 l /min
* you may nov the sentence BUILT AND NOT FORGET * also if you are not at installation the pump with regulation modul automatic pumping in case water level increasing * faeces * system is simply made automaticylly turns-on over level switch or sensor and automatically turns-off at water level decreasing , main advantage is in puming dirty and agressive hot liquid system is completely reliable, in systems for collecting spilled liquids and oil emulsions are specially good because the pump collects oil together with abrasive substances dispersed in media * system is very reliable and usefull by ISO 14000 Enviromental STANDARDU* the liquid is pumped in DEVICES for ELIMINATION of OIL and EMULSIONS * besides standard abd floating level switches we built-in a microprocessor regulation sensors , they work on measurement principle of liquid resistance, system is very reliable and cheap *
sucking basket PEHD dosing NaOH assembling on cover view in reservoir		Specially purposed for pumping of agressive pure, dirty, with hard (abrasive) small parts enriched liquids, emulsions, suspensions. With this pumps we can do mixing, filtering, dosing, automatic elimination of spilled liquids, chemicals from kinet, basins, chanels, containers. With hand usage can limitlessly operate in dry run. High density liquids, oil, acids and alkaline substances are not problem for pumping. For food industry are constructions from rustless sheet metal series R 20-600 INOX MATERIALS: W.Nr. 1.4301 ,1.4404.1.4571 R-180 PP R100 INOX	Pumping of lixivial suspension from industrial wash machine R-200 PP below cower shield HELIOS Oil factory.
* ASSEMBLING* takes a few hours including with pipelines * Expirience SERVICE * in most cases only motor bearing change after few years operation * METHODS of BUILDING-IN on landing at the edge of basin kinete * chanel * container motor ca not be filled with water if is basin to deep we give additional sucking pipe up-to 4 mVS * if is not possible previous watering we build-in nonreversed valve with ball * if is flow to high we install a flow regulator * for very fibric * long * large * floating parts against rotor damages we install sucking baskets * POLYPROPILENE - INOX constructions for crashing and pulling of dirt before pumping construction PUMP - MIXER for abrasive neutralitation systems in purifying plants * PUMP - FILTER construction on sucking part candle exchanged or linened filter *
R-300 PP Pumping of abrasive suspensions CINKARNA Celje d.d. Q= 300 l/min H max= 20 mVS	R-500 PP pumping of acid waste waters, automatic regulation Q= 500 l/min H max= 30 mVS		R-600 PP pumping of faeces with hard small pieces Q= 600 l/min H max= 35 mVS