| HAND CENTRIFUGAL SELFSUCKING PUMPS Type: S-80 INOX DESCRIPTION Centrifugal selfsucking pumps are purposed for pumping of agressive, pure liquids and high density liquids in several branches of industry.Connection on electric network is possible with standard 4-meter connection wire with single-pole connector. Pumps is started with turn-on key.
Pipe's connection for released presure pipeline is with dvovijačnikom screwed on pump. Pump's frame is made as manipulative handle which protects the pump for damages. Pump is standardly delivered with wall console for taking off the pump. Wall console serves fro taking off the pump and pipeline, when are not used. It is completely hand construction, at proper preparation can be handled by one single person.
ADVANTAGES Essential innovative advantage is construction with asynchronous motor instead of collector-one. Circumferential speeds FOUR-TIMES lower. Pump is running calm and quietly. Dry run is harmless and is time-extended.
OPERATION Works in way, that ont the start of sucking pipe lifts-up the liquid to pressure centrifugal rotor, which enables adequate flows. For low circumferential speeds are bearings a lot less loaded, it is possible to pump liquids with high viscosity (oil, oil emulsions).
|  
model: SB 80-INOX - 920 / 230V |   | | material: | 1.4571 CrNiMo inox steel | | sucking lengths : | 620 and 920 mm | | diameter of sucking pipe: | D 50 mm ( goes in ADR hobok ) | | drive: | SIEMENS 380W , 230V 50Hz | | diameter of pressure pipe: | D 25 mm | | tightenning : | oxy.cheramics / epdm / oxy.cheramics ,PTFE | | max flow: | 80 l/min = 4,8m3/h |
| | material: | Polypropylene | | sucking lengths : | 620 and 920 mm | | diameter of sucking pipe: | D 50 mm ( goes in ADR hobok ) | | drive: | SIEMENS 380W , 230V 50Hz | | diameter of pressure pipe: | D 25 mm | | tightenning : | oxy.cheramics / fpm / oxy.cheramics ,PTFE | | max flow: | 80 l/min = 4,8m3/h |
| 
standard models
Polypropylene and INOX
S-80 PP S-80 INOX | Material: INOX W.Nr.1.4571 Cr.Ni.Ti Max flow: 80 l/min Max pressure hight: 6 mVS Motor: 370 W, 230V, 50Hz Cinematic viscosity: < 1142 mm/s Tightenning: Not necessary - returning flex Max media temp.: 120o C Weight: 4,5 kg Length of sucking pipe: 620 mm for 60 l ADR packing, 900 mm for 200 l barrels
| 
Pump is pumping a content
from ADR package earlier than
1 minute
| 
Standard lenghts for sucking pipes
620 mm -for ADR package
920 mm - for industryal barrels 200 l |
The curve for pump's operation factor , type: S 80 INOX |  
S-80 INOX S-80 INOX
S izpust I izpust
Construction for pressure flex construction are made on request.
Standard constructions are made with screw clamp and connection smerekico with INOX objemko.
Construction of pressure exit are I , S | | 
INOX construction is designed mostly for food industry and for systems with high temperature presence.
PLASTIC PP or PVC construction is designed mostly for chemical industry. | 
To avoid doubts about quality and functionality of product, we have published a few rewards. Quality is veryfied by many satisfied buyers in many years.
|
An example of pumping fron one container to another.
To prevent automatic break of pressure pipe from container , we are pumping into
we make natične čepe z dvovijačnikom. natični čep is putted on container,
pressure pipe is screwed and pumping can be made by one person very safe.
| 
one of sucking baskets
INOX wall console for taking off the pump
N100-INOX | 
Pump SB 100 PP -
with new design
| 
pumping of laundry softener
pump: S- 150 pp Q=150l/min
CHEMO - kemija LJUBLJANA
|
| 
pumping of separated oil and emulsions
from
Automatic oil and emulsion separation device | | | | | | [ Back ] [ Products ] [ Location ] [ News ] [ Useful info. ] |
|